Decoration For Living Rooms

Decoration For Living Rooms

Panel for hangings

This frame design is ideal for delicate embroidered hangings. Its construction is very similar to that of a large picture frame, using deeply-rebated moulding with a gently curved face.

1 Decide on the height and width of the screen and make up the frame. Slot in a gilded wood fillet, the hanging supported on a sheet of hardboard (if it is a delicate embroidery, attach it with Velcro as described on page 180), and protect the hanging with a sheet of perspex if necessary.

2 Position horizontal cross-braces made out of 75 x 25 mm (3×1 in) at one-third intervals to strengthen the screen. Fix the cross braces with brass screws, counter-sunk into the sides of the frame.

3 Finally, to keep the edges of the panel flat, insert lengths of square section beading between the cross-braces. Fix in place with panel pins.

Hardboard panel

Use 50 x 25 mm (2×1 in) softwood to make a frame with two verticals and four horizontals. Fix the top and bottom corners with corner lap joints; space the remaining horizontals at one-third intervals and fix in through-housings.

Glue and screw all the joints together. To fix the curved top section, drill through half the depth of the horizontal brace below. Run a pilot hole through the remaining section and up into the curved top. Glue before screwing together.

Decoration For Living Rooms Photo Gallery

Click on Photos for Next Decoration For Living Rooms Gallery Images

One Response to “Decoration For Living Rooms”

  1. May 27, 2017

    Paul Steinmeyer Reply

    I wish to get across my love for your generosity for persons that should have help on the concern.

Leave a Reply

Your email address will not be published. Required fields are marked *


*