Interior design idea

You’ll also need Screwdriver; sandpaper; paint brush, roller and tray Here’s how STEP 1 Use screwdriver to remove existing handles from cabinets. STEP 2 Sand laminate doors and drawers to remove gloss from surfaces. Remove dust and clean surfaces using sugar soap. STEP 3 Using paint brush, apply primer in corners and edges. Use paint roller for flat surfaces. Let dry. STEP 4 To finish, apply 2 coats of water-based enamel paint, allowing to dry after each coat. Interior design idea Photography Phil Aynsley, John Halfhide; styling Jacqui Pix (TV), Vanessa Tidy (magazine); projects Chris Cort, Grahame Rowe, Greg Sparke Tip 30 BUILDING A FRONT FENCE Gather your supplies Posts – 1500 x 100 x 100mm H4 treated pine (rough sawn) Rails – 90 x 45mm H3 treated pine Wire fence panels (from old fence) You’ll also need Angle grinder; post-hole digger; self priming exterior acrylic paint (try Dulux Weathershield Colorbond Wallaby); paint roller and tray; power saw; spirit level; quick-set concrete (2 bags per hole); stringline; nails; sharp chisel; drill; 100mm galvanised batten screws; 30mm galvanised button head screws

Interior design idea Photo Gallery






Maybe You Like Them Too

Leave a Reply

17 − 9 =